UNHMESSAGE HEADERM 1

1Mandatory A service segment starting and uniquely identifying a message. The message type code for the Drawing organisation message is CONDRO.
0062
MESSAGE REFERENCE NUMBER
Mandatoryan0..14
Unique message reference assigned by the sender.
S009
MESSAGE IDENTIFIER
Mandatory
Identification of the type, version etc. of the message being interchanged.
0065
Message type identifier
Mandatoryan0..6
Code identifying a type of message and assigned by its controlling agency.
Show all standard codes
0052
Message type version number
Mandatoryan0..3
Version number of a message type.
Show all standard codes
0054
Message type release number
Mandatoryan0..3
Release number within the current message type version number (0052).
Show all standard codes
0051
Controlling agency
Mandatoryan0..2
Code identifying the agency controlling the specification, maintenance and publication of the message type.
Show all standard codes
0057
Association assigned code
Conditionalan0..6
Code, assigned by the association responsible for the design and maintenance of the message type concerned, which further identifies the message.
0068
COMMON ACCESS REFERENCE
Conditionalan0..35
Reference serving as a key to relate all subsequent transfers of data to the same business case or file.
S010
STATUS OF THE TRANSFER
Conditional
Statement that the message is one in a sequence of transfers relating to the same topic.
0070
Sequence message transfer number
Mandatoryn0..2
Number assigned by the sender indicating that the message is an addition or change of a previously sent message relating to the same topic.
0073
First/last sequence message transfer indication
Conditionaln1
Indication used for the first and last message in a sequence of the same type of message relating to the same topic.
Show all standard codes

BGMBEGINNING OF MESSAGEM 1

1Mandatory A segment for unique identification of the Drawing Organisation name, number and function.
C002
DOCUMENT/MESSAGE NAME
Conditional
Identification of a type of document/message by code or name. Code preferred.
1001
Document/message name, coded
Conditionalan0..3
Document/message identifier expressed in code.
Show all standard codes
1131
Code list qualifier
Conditionalan0..3
Identification of a code list.
Show all standard codes
3055
Code list responsible agency, coded
Conditionalan0..3
Code identifying the agency responsible for a code list.
Show all standard codes
1000
Document/message name
Conditionalan0..35
Plain language identifier specifying the function of a document/message.
C106
DOCUMENT/MESSAGE IDENTIFICATION
Conditional
Identification of a document/message by its number and eventually its version or revision.
1004
Document/message number
Conditionalan0..35
Reference number assigned to the document/message by the issuer.
1056
Version
Conditionalan0..9
To specify the version number or name of an object.
1060
Revision number
Conditionalan0..6
To specify a revision number.
1225
MESSAGE FUNCTION, CODED
Conditionalan0..3
Code indicating the function of the message.
Show all standard codes
4343
RESPONSE TYPE, CODED
Conditionalan0..3
Code specifying the type of acknowledgment required or transmitted.
Show all standard codes

DTMDATE/TIME/PERIODM 5

5Mandatory A segment specifying the dates relevant to this document; e.g. the date the agreement of the drawing organisation information in this message has been defined or redefined (in case of changes).
C507
DATE/TIME/PERIOD
Mandatory
Date and/or time, or period relevant to the specified date/time/period type.
2005
Date/time/period qualifier
Mandatoryan0..3
Code giving specific meaning to a date, time or period.
Show all standard codes
2380
Date/time/period
Conditionalan0..35
The value of a date, a date and time, a time or of a period in a specified representation.
2379
Date/time/period format qualifier
Conditionalan0..3
Specification of the representation of a date, a date and time or of a period.
Show all standard codes

AUTAUTHENTICATION RESULTC 2

2Conditional A segment used to authenticate the message by exchanging a password or some other form of identification agreed between the business partners.
9280
VALIDATION RESULT
Mandatoryan0..35
The result of the application of an algorithm to the content of data element in a message.
9282
VALIDATION KEY IDENTIFICATION
Conditionalan0..35
Identifies the cryptographic key used to calculate the validation result.

AGRAGREEMENT IDENTIFICATIONC 2

2Conditional A segment will be used to identify the 'type of agreement of the organisation of engineering or CAD files' that apply to the information given by this message.
C543
AGREEMENT TYPE IDENTIFICATION
Conditional
Identification of specific agreement type by code or name.
7431
Agreement type qualifier
Mandatoryan0..3
Indication of the type of agreement.
Show all standard codes
7433
Agreement type, coded
Conditionalan0..3
Specification of the type of agreement.
Show all standard codes
1131
Code list qualifier
Conditionalan0..3
Identification of a code list.
Show all standard codes
3055
Code list responsible agency, coded
Conditionalan0..3
Code identifying the agency responsible for a code list.
Show all standard codes
7434
Agreement type description
Conditionalan0..70
Description of the type of agreement.
9419
SERVICE LAYER, CODED
Conditionalan0..3
Subdivision of a service by code.

FTXFREE TEXTC 10

10Conditional A segment with free text information, in coded or clear form, used for any textual information. In computer to computer exchanges, such text will require the receiver to process this segment manually.
4451
TEXT SUBJECT QUALIFIER
Mandatoryan0..3
Code specifying subject of a free text.
Show all standard codes
4453
TEXT FUNCTION, CODED
Conditionalan0..3
Code specifying how to handle the text.
Show all standard codes
C107
TEXT REFERENCE
Conditional
Coded reference to a standard text and its source.
4441
Free text identification
Mandatoryan0..17
Free text in coded form.
1131
Code list qualifier
Conditionalan0..3
Identification of a code list.
Show all standard codes
3055
Code list responsible agency, coded
Conditionalan0..3
Code identifying the agency responsible for a code list.
Show all standard codes
C108
TEXT LITERAL
Conditional
Free text; one to five lines.
4440
Free text
Mandatoryan0..70
Free text field available to the message sender for information.
4440
Free text
Conditionalan0..70
Free text field available to the message sender for information.
4440
Free text
Conditionalan0..70
Free text field available to the message sender for information.
4440
Free text
Conditionalan0..70
Free text field available to the message sender for information.
4440
Free text
Conditionalan0..70
Free text field available to the message sender for information.
3453
LANGUAGE, CODED
Conditionalan0..3
Code of language (ISO 639-1988).

GRP1 RFF DOC DTM FTXM 5

5Mandatory A group of segments used for quoting references and their relevant dates applicable to the message. For the building industry the following recommendation is given: in the first occurrence of this segment group the project references, if relevant, should be given, in order to identify the project to which this message relates. In any later recurrence of this segment group, references to other messages (e.g. the original CONDRO when it is an update) or documents, relevant to this message, may be quoted.

RFFREFERENCEM 1

1Mandatory A segment for quoting the unique references which can be the project number for which this message is relevant, or, in the case of a reference to another message or document, that message or document's unique identifier.
C506
REFERENCE
Mandatory
Identification of a reference.
1153
Reference qualifier
Mandatoryan0..3
Code giving specific meaning to a reference segment or a reference number.
Show all standard codes
1154
Reference number
Conditionalan0..35
Identification number the nature and function of which can be qualified by an entry in data element 1153 Reference qualifier.
1156
Line number
Conditionalan0..6
Number of the line in the document/message referenced in 1154 Reference number.
4000
Reference version number
Conditionalan0..35
To uniquely identify a reference by its version number.

DOCDOCUMENT/MESSAGE DETAILSC 1

1Conditional Document details for the reference quoted in the previous RFF segment.
C002
DOCUMENT/MESSAGE NAME
Mandatory
Identification of a type of document/message by code or name. Code preferred.
1001
Document/message name, coded
Conditionalan0..3
Document/message identifier expressed in code.
Show all standard codes
1131
Code list qualifier
Conditionalan0..3
Identification of a code list.
Show all standard codes
3055
Code list responsible agency, coded
Conditionalan0..3
Code identifying the agency responsible for a code list.
Show all standard codes
1000
Document/message name
Conditionalan0..35
Plain language identifier specifying the function of a document/message.
C503
DOCUMENT/MESSAGE DETAILS
Conditional
Identification of document/message by number, status, source and/or language.
1004
Document/message number
Conditionalan0..35
Reference number assigned to the document/message by the issuer.
1373
Document/message status, coded
Conditionalan0..3
To identify the status of a document/message.
Show all standard codes
1366
Document/message source
Conditionalan0..35
Indication of the source from which the printed information is to be or has been obtained.
3453
Language, coded
Conditionalan0..3
Code of language (ISO 639-1988).
3153
COMMUNICATION CHANNEL IDENTIFIER, CODED
Conditionalan0..3
Code identifying the type of communication channel being used.
Show all standard codes
1220
NUMBER OF COPIES OF DOCUMENT REQUIRED
Conditionaln0..2
Number of originals or copies of a document stipulated or referred to as being required.
1218
NUMBER OF ORIGINALS OF DOCUMENT REQUIRED
Conditionaln0..2
Specification of the number of originals of a stipulated document that are required.

DTMDATE/TIME/PERIODC 1

1Conditional Date of a reference quoted in the previous RFF segment, e.g. project date or message/document date.
C507
DATE/TIME/PERIOD
Mandatory
Date and/or time, or period relevant to the specified date/time/period type.
2005
Date/time/period qualifier
Mandatoryan0..3
Code giving specific meaning to a date, time or period.
Show all standard codes
2380
Date/time/period
Conditionalan0..35
The value of a date, a date and time, a time or of a period in a specified representation.
2379
Date/time/period format qualifier
Conditionalan0..3
Specification of the representation of a date, a date and time or of a period.
Show all standard codes

FTXFREE TEXTC 5

5Conditional This segment can contain any textual information relevant to the reference quoted in the previous RFF segment, e.g. a small project or message/document description and/or other narrative, for additional information.
4451
TEXT SUBJECT QUALIFIER
Mandatoryan0..3
Code specifying subject of a free text.
Show all standard codes
4453
TEXT FUNCTION, CODED
Conditionalan0..3
Code specifying how to handle the text.
Show all standard codes
C107
TEXT REFERENCE
Conditional
Coded reference to a standard text and its source.
4441
Free text identification
Mandatoryan0..17
Free text in coded form.
1131
Code list qualifier
Conditionalan0..3
Identification of a code list.
Show all standard codes
3055
Code list responsible agency, coded
Conditionalan0..3
Code identifying the agency responsible for a code list.
Show all standard codes
C108
TEXT LITERAL
Conditional
Free text; one to five lines.
4440
Free text
Mandatoryan0..70
Free text field available to the message sender for information.
4440
Free text
Conditionalan0..70
Free text field available to the message sender for information.
4440
Free text
Conditionalan0..70
Free text field available to the message sender for information.
4440
Free text
Conditionalan0..70
Free text field available to the message sender for information.
4440
Free text
Conditionalan0..70
Free text field available to the message sender for information.
3453
LANGUAGE, CODED
Conditionalan0..3
Code of language (ISO 639-1988).

GRP2 NAD LOC FTX GRP3 GRP4M 999

999Mandatory A group of segments identifying all the relevant parties with specific information about them that other business partner should know.

NADNAME AND ADDRESSM 1

1Mandatory A segment identifying name and address of a party, in coded or clear form, and its function relevant to the Drawing Organisation Message. This is to identify each partner involved in the future exchange of CAD files. It is recommended that where possible only the coded form of the party ID should be specified.
3035
PARTY QUALIFIER
Mandatoryan0..3
Code giving specific meaning to a party.
Show all standard codes
C082
PARTY IDENTIFICATION DETAILS
Conditional
Identification of a transaction party by code.
3039
Party identification
Mandatoryan0..35
Code identifying a party involved in a transaction.
1131
Code list qualifier
Conditionalan0..3
Identification of a code list.
Show all standard codes
3055
Code list responsible agency, coded
Conditionalan0..3
Code identifying the agency responsible for a code list.
Show all standard codes
C058
NAME AND ADDRESS
Conditional
Unstructured name and address: one to five lines.
3124
Name and address line
Mandatoryan0..35
Free form name and address description.
3124
Name and address line
Conditionalan0..35
Free form name and address description.
3124
Name and address line
Conditionalan0..35
Free form name and address description.
3124
Name and address line
Conditionalan0..35
Free form name and address description.
3124
Name and address line
Conditionalan0..35
Free form name and address description.
C080
PARTY NAME
Conditional
Identification of a transaction party by name, one to five lines. Party name may be formatted.
3036
Party name
Mandatoryan0..35
Name of a party involved in a transaction.
3036
Party name
Conditionalan0..35
Name of a party involved in a transaction.
3036
Party name
Conditionalan0..35
Name of a party involved in a transaction.
3036
Party name
Conditionalan0..35
Name of a party involved in a transaction.
3036
Party name
Conditionalan0..35
Name of a party involved in a transaction.
3045
Party name format, coded
Conditionalan0..3
Specification of the representation of a party name.
Show all standard codes
C059
STREET
Conditional
Street address and/or PO Box number in a structured address: one to four lines.
3042
Street and number/p.o. box
Mandatoryan0..35
Street and number in plain language, or Post Office Box No.
3042
Street and number/p.o. box
Conditionalan0..35
Street and number in plain language, or Post Office Box No.
3042
Street and number/p.o. box
Conditionalan0..35
Street and number in plain language, or Post Office Box No.
3042
Street and number/p.o. box
Conditionalan0..35
Street and number in plain language, or Post Office Box No.
3164
CITY NAME
Conditionalan0..35
Name of a city (a town, a village) for addressing purposes.
3229
COUNTRY SUB-ENTITY IDENTIFICATION
Conditionalan0..9
Identification of the name of sub-entities (state, province) defined by appropriate governmental agencies.
3251
POSTCODE IDENTIFICATION
Conditionalan0..9
Code defining postal zones or addresses.
3207
COUNTRY, CODED
Conditionalan0..3
Identification of the name of a country or other geographical entity as specified in ISO 3166.

LOCPLACE/LOCATION IDENTIFICATIONC 99

99Conditional A segment giving more specific location information of the party specified in the NAD segment e.g. internal site/building number.
3227
PLACE/LOCATION QUALIFIER
Mandatoryan0..3
Code identifying the function of a location.
Show all standard codes
C517
LOCATION IDENTIFICATION
Conditional
Identification of a location by code or name.
3225
Place/location identification
Conditionalan0..25
Identification of the name of place/location, other than 3164 City name.
1131
Code list qualifier
Conditionalan0..3
Identification of a code list.
Show all standard codes
3055
Code list responsible agency, coded
Conditionalan0..3
Code identifying the agency responsible for a code list.
Show all standard codes
3224
Place/location
Conditionalan0..70
Name of place/location, other than 3164 City name.
C519
RELATED LOCATION ONE IDENTIFICATION
Conditional
Identification the first related location by code or name.
3223
Related place/location one identification
Conditionalan0..25
Specification of the first related place/location by code.
1131
Code list qualifier
Conditionalan0..3
Identification of a code list.
Show all standard codes
3055
Code list responsible agency, coded
Conditionalan0..3
Code identifying the agency responsible for a code list.
Show all standard codes
3222
Related place/location one
Conditionalan0..70
Specification of the first related place/location by name.
C553
RELATED LOCATION TWO IDENTIFICATION
Conditional
Identification of second related location by code or name.
3233
Related place/location two identification
Conditionalan0..25
Specification of a second related place/location by code.
1131
Code list qualifier
Conditionalan0..3
Identification of a code list.
Show all standard codes
3055
Code list responsible agency, coded
Conditionalan0..3
Code identifying the agency responsible for a code list.
Show all standard codes
3232
Related place/location two
Conditionalan0..70
Specification of a second related place/location by name.
5479
RELATION, CODED
Conditionalan0..3
To specify the relationship between two or more items.

FTXFREE TEXTC 10

10Conditional A segment giving more specific location information of the party specified in the NAD segment e.g. internal site/building number.
4451
TEXT SUBJECT QUALIFIER
Mandatoryan0..3
Code specifying subject of a free text.
Show all standard codes
4453
TEXT FUNCTION, CODED
Conditionalan0..3
Code specifying how to handle the text.
Show all standard codes
C107
TEXT REFERENCE
Conditional
Coded reference to a standard text and its source.
4441
Free text identification
Mandatoryan0..17
Free text in coded form.
1131
Code list qualifier
Conditionalan0..3
Identification of a code list.
Show all standard codes
3055
Code list responsible agency, coded
Conditionalan0..3
Code identifying the agency responsible for a code list.
Show all standard codes
C108
TEXT LITERAL
Conditional
Free text; one to five lines.
4440
Free text
Mandatoryan0..70
Free text field available to the message sender for information.
4440
Free text
Conditionalan0..70
Free text field available to the message sender for information.
4440
Free text
Conditionalan0..70
Free text field available to the message sender for information.
4440
Free text
Conditionalan0..70
Free text field available to the message sender for information.
4440
Free text
Conditionalan0..70
Free text field available to the message sender for information.
3453
LANGUAGE, CODED
Conditionalan0..3
Code of language (ISO 639-1988).

GRP3 RFF CED DTMC 10

10Conditional This segment group has two functions: Firstly, it can be used to quote specific references for each partner for internal use. Examples of references: a partner may require a internal project number or a DP number. Secondly, the main function of this segment group, is to describe for each partner his internal computer environment, from the hardware platform and operating system to the software implemented. For each partner several environments may be described, as, particularly in large organisations, different environments can be in use simultaneously. Each environment will be identified through a unique reference number specific to that partner.

RFFREFERENCEM 1

1Mandatory In this segment specific internal references will be quoted, as and if required. When this segment group is used to describe the computer environment, this segment segment which will specify the unique reference number by which, in future, the following computer environment details for this party can be identified.
C506
REFERENCE
Mandatory
Identification of a reference.
1153
Reference qualifier
Mandatoryan0..3
Code giving specific meaning to a reference segment or a reference number.
Show all standard codes
1154
Reference number
Conditionalan0..35
Identification number the nature and function of which can be qualified by an entry in data element 1153 Reference qualifier.
1156
Line number
Conditionalan0..6
Number of the line in the document/message referenced in 1154 Reference number.
4000
Reference version number
Conditionalan0..35
To uniquely identify a reference by its version number.

CEDCOMPUTER ENVIRONMENT DETAILSC 10

10Conditional By repeating this segment, it will describe, at each occurrence, one of the party's computer environments, identified in the previous RFF segment. The computer environment details will consist of, for example, hardware platform, operating system, software in use, converter etc.
1501
COMPUTER ENVIRONMENT DETAILS QUALIFIER
Mandatoryan0..3
A code to identify the computer environment details.
Show all standard codes
C079
COMPUTER ENVIRONMENT IDENTIFICATION
Mandatory
To identify parts of a computer environment.
1511
Computer environment, coded
Conditionalan0..3
A code to identify the computer environment.
1131
Code list qualifier
Conditionalan0..3
Identification of a code list.
Show all standard codes
3055
Code list responsible agency, coded
Conditionalan0..3
Code identifying the agency responsible for a code list.
Show all standard codes
1510
Computer environment
Conditionalan0..35
To define the product name of the specified computer environment part.
1056
Version
Conditionalan0..9
To specify the version number or name of an object.
1058
Release
Conditionalan0..9
To specify the release number or release name of an object.
7402
Identity number
Conditionalan0..35
The number given to an object for its unique identification.

DTMDATE/TIME/PERIODC 1

1Conditional A segment specifying the date and/or time details related to the environment details.
C507
DATE/TIME/PERIOD
Mandatory
Date and/or time, or period relevant to the specified date/time/period type.
2005
Date/time/period qualifier
Mandatoryan0..3
Code giving specific meaning to a date, time or period.
Show all standard codes
2380
Date/time/period
Conditionalan0..35
The value of a date, a date and time, a time or of a period in a specified representation.
2379
Date/time/period format qualifier
Conditionalan0..3
Specification of the representation of a date, a date and time or of a period.
Show all standard codes

GRP4 CTA COM LOCC 10

10Conditional A group of segments giving contact details of the specific person or department within the party identified in the NAD segment.

CTACONTACT INFORMATIONM 1

1Mandatory A segment to identify a person or department, and their function, to whom communications should be directed.
3139
CONTACT FUNCTION, CODED
Conditionalan0..3
Code specifying the function of a contact (e.g. department or person).
Show all standard codes
C056
DEPARTMENT OR EMPLOYEE DETAILS
Conditional
Code and/or name of a department or employee. Code preferred.
3413
Department or employee identification
Conditionalan0..17
Internal identification code.
3412
Department or employee
Conditionalan0..35
The department or person within an organizational entity.

COMCOMMUNICATION CONTACTC 5

5Conditional A segment to identify a communication type and number for the contact specified in the CTA segment.
C076
COMMUNICATION CONTACT
Mandatory
Communication number of a department or employee in a specified channel.
3148
Communication number
Mandatoryan0..512
The communication number.
3155
Communication channel qualifier
Mandatoryan0..3
Code identifying the type of communication channel being used.
Show all standard codes

LOCPLACE/LOCATION IDENTIFICATIONC 1

1Conditional This segment specifies the location of the contact described in the previous CTA segment. In large organisations and construction projects it is possible that persons are not necessarily on the same internal site or construction site specified in the previous LOC segment in segment group 2. This segment also enables the specification of a more accurate internal site location.
3227
PLACE/LOCATION QUALIFIER
Mandatoryan0..3
Code identifying the function of a location.
Show all standard codes
C517
LOCATION IDENTIFICATION
Conditional
Identification of a location by code or name.
3225
Place/location identification
Conditionalan0..25
Identification of the name of place/location, other than 3164 City name.
1131
Code list qualifier
Conditionalan0..3
Identification of a code list.
Show all standard codes
3055
Code list responsible agency, coded
Conditionalan0..3
Code identifying the agency responsible for a code list.
Show all standard codes
3224
Place/location
Conditionalan0..70
Name of place/location, other than 3164 City name.
C519
RELATED LOCATION ONE IDENTIFICATION
Conditional
Identification the first related location by code or name.
3223
Related place/location one identification
Conditionalan0..25
Specification of the first related place/location by code.
1131
Code list qualifier
Conditionalan0..3
Identification of a code list.
Show all standard codes
3055
Code list responsible agency, coded
Conditionalan0..3
Code identifying the agency responsible for a code list.
Show all standard codes
3222
Related place/location one
Conditionalan0..70
Specification of the first related place/location by name.
C553
RELATED LOCATION TWO IDENTIFICATION
Conditional
Identification of second related location by code or name.
3233
Related place/location two identification
Conditionalan0..25
Specification of a second related place/location by code.
1131
Code list qualifier
Conditionalan0..3
Identification of a code list.
Show all standard codes
3055
Code list responsible agency, coded
Conditionalan0..3
Code identifying the agency responsible for a code list.
Show all standard codes
3232
Related place/location two
Conditionalan0..70
Specification of a second related place/location by name.
5479
RELATION, CODED
Conditionalan0..3
To specify the relationship between two or more items.

GRP5 DOC INP RFF MEA GRP6C 999

999Conditional In this segment group a 'contractual document' can be described that is relevant to a certain project or project phase. A contractual document consists of one or more computer files which be quoted and linked by a file identification to the corresponding contractual document.

DOCDOCUMENT/MESSAGE DETAILSM 1

1Mandatory This segment will give the document details of the contractual document.
C002
DOCUMENT/MESSAGE NAME
Mandatory
Identification of a type of document/message by code or name. Code preferred.
1001
Document/message name, coded
Conditionalan0..3
Document/message identifier expressed in code.
Show all standard codes
1131
Code list qualifier
Conditionalan0..3
Identification of a code list.
Show all standard codes
3055
Code list responsible agency, coded
Conditionalan0..3
Code identifying the agency responsible for a code list.
Show all standard codes
1000
Document/message name
Conditionalan0..35
Plain language identifier specifying the function of a document/message.
C503
DOCUMENT/MESSAGE DETAILS
Conditional
Identification of document/message by number, status, source and/or language.
1004
Document/message number
Conditionalan0..35
Reference number assigned to the document/message by the issuer.
1373
Document/message status, coded
Conditionalan0..3
To identify the status of a document/message.
Show all standard codes
1366
Document/message source
Conditionalan0..35
Indication of the source from which the printed information is to be or has been obtained.
3453
Language, coded
Conditionalan0..3
Code of language (ISO 639-1988).
3153
COMMUNICATION CHANNEL IDENTIFIER, CODED
Conditionalan0..3
Code identifying the type of communication channel being used.
Show all standard codes
1220
NUMBER OF COPIES OF DOCUMENT REQUIRED
Conditionaln0..2
Number of originals or copies of a document stipulated or referred to as being required.
1218
NUMBER OF ORIGINALS OF DOCUMENT REQUIRED
Conditionaln0..2
Specification of the number of originals of a stipulated document that are required.

INPPARTIES AND INSTRUCTIONC 99

99Conditional This segment conveys for each receiver instructions of what to do with the contractual document.
C849
PARTIES TO INSTRUCTION
Conditional
Identify the sending and receiving parties of the instruction.
3301
Party enacting instruction identification
Mandatoryan0..17
Party responsible for carrying out the instruction.
Show all standard codes
3285
Recipient of the instruction identification
Conditionalan0..17
Party to whom the instruction is directed for advice or action.
Show all standard codes
C522
INSTRUCTION
Conditional
To specify an instruction.
4403
Instruction qualifier
Mandatoryan0..3
Code giving specific meaning to the type of instructions.
Show all standard codes
4401
Instruction, coded
Conditionalan0..3
Specification of an action to be taken by the receiver of the message.
Show all standard codes
1131
Code list qualifier
Conditionalan0..3
Identification of a code list.
Show all standard codes
3055
Code list responsible agency, coded
Conditionalan0..3
Code identifying the agency responsible for a code list.
Show all standard codes
4400
Instruction
Conditionalan0..35
Description of an instruction.
C850
STATUS OF INSTRUCTION
Conditional
Provides information regarding the status of an instruction.
4405
Status, coded
Mandatoryan0..3
Provides information regarding a status.
Show all standard codes
3036
Party name
Conditionalan0..35
Name of a party involved in a transaction.
1229
ACTION REQUEST/NOTIFICATION, CODED
Conditionalan0..3
Code specifying the action to be taken or already taken.
Show all standard codes

RFFREFERENCEC 1

1Conditional A segment to indicate the unique reference number of the contractual document.
C506
REFERENCE
Mandatory
Identification of a reference.
1153
Reference qualifier
Mandatoryan0..3
Code giving specific meaning to a reference segment or a reference number.
Show all standard codes
1154
Reference number
Conditionalan0..35
Identification number the nature and function of which can be qualified by an entry in data element 1153 Reference qualifier.
1156
Line number
Conditionalan0..6
Number of the line in the document/message referenced in 1154 Reference number.
4000
Reference version number
Conditionalan0..35
To uniquely identify a reference by its version number.

MEAMEASUREMENTSC 1

1Conditional This segment will give details about the scale used in the contractual document.
6311
MEASUREMENT PURPOSE QUALIFIER
Mandatoryan0..3
Specification of the purpose of the measurement.
Show all standard codes
C502
MEASUREMENT DETAILS
Conditional
Identification of measurement type.
6313
Property measured, coded
Conditionalan0..3
Specification of the property measured.
Show all standard codes
6321
Measurement significance, coded
Conditionalan0..3
Code specifying the significance of a measurement value.
Show all standard codes
6155
Measurement attribute identification
Conditionalan0..17
Code used to specify non-discrete measurement values.
Show all standard codes
6154
Measurement attribute
Conditionalan0..70
To specify non-discrete measurement values.
C174
VALUE/RANGE
Conditional
Measurement value and relevant minimum and maximum values of the measurement range.
6411
Measure unit qualifier
Mandatoryan0..3
Indication of the unit of measurement in which weight (mass), capacity, length, area, volume or other quantity is expressed.
6314
Measurement value
Conditionalan0..18
Value of the measured unit.
6162
Range minimum
Conditionaln0..18
Minimum of a range.
6152
Range maximum
Conditionaln0..18
Maximum of a range.
6432
Significant digits
Conditionaln0..2
To specify the number of significant digits.
7383
SURFACE/LAYER INDICATOR, CODED
Conditionalan0..3
Code indicating the surface or layer of a product that is being described.
Show all standard codes

GRP6 EFI CED DTMC 99

99Conditional In this segment group files may be identified which will form part of the previously quoted contractual document. These computer files are external ones which will not necessarily be part of the exchange of the message.

EFIEXTERNAL FILE LINK IDENTIFICATIONM 1

1Mandatory This segment will identify each file, that is part of the contractual document, by quoting their name and a number.
C077
FILE IDENTIFICATION
Mandatory
To identify a file.
1508
File name
Conditionalan0..35
Name assigned to a file.
7008
Item description
Conditionalan0..35
Plain language description of articles or products.
C099
FILE DETAILS
Conditional
To define details relevant to a file.
1516
File format
Mandatoryan0..17
To give an identification of the file format.
1056
Version
Conditionalan0..9
To specify the version number or name of an object.
1503
Data format, coded
Conditionalan0..3
A code to identify the data format.
Show all standard codes
1502
Data format
Conditionalan0..35
To describe a data format in free form.
1050
SEQUENCE NUMBER
Conditionalan0..10
Number indicating the position in a sequence.

CEDCOMPUTER ENVIRONMENT DETAILSC 10

10Conditional The segment will give additional information about the file identified in the previous EFI segment, like for example, conversion details.
1501
COMPUTER ENVIRONMENT DETAILS QUALIFIER
Mandatoryan0..3
A code to identify the computer environment details.
Show all standard codes
C079
COMPUTER ENVIRONMENT IDENTIFICATION
Mandatory
To identify parts of a computer environment.
1511
Computer environment, coded
Conditionalan0..3
A code to identify the computer environment.
1131
Code list qualifier
Conditionalan0..3
Identification of a code list.
Show all standard codes
3055
Code list responsible agency, coded
Conditionalan0..3
Code identifying the agency responsible for a code list.
Show all standard codes
1510
Computer environment
Conditionalan0..35
To define the product name of the specified computer environment part.
1056
Version
Conditionalan0..9
To specify the version number or name of an object.
1058
Release
Conditionalan0..9
To specify the release number or release name of an object.
7402
Identity number
Conditionalan0..35
The number given to an object for its unique identification.

DTMDATE/TIME/PERIODC 5

5Conditional This segment will convey the date/time details of the computer file identified in the previous EFI segment.
C507
DATE/TIME/PERIOD
Mandatory
Date and/or time, or period relevant to the specified date/time/period type.
2005
Date/time/period qualifier
Mandatoryan0..3
Code giving specific meaning to a date, time or period.
Show all standard codes
2380
Date/time/period
Conditionalan0..35
The value of a date, a date and time, a time or of a period in a specified representation.
2379
Date/time/period format qualifier
Conditionalan0..3
Specification of the representation of a date, a date and time or of a period.
Show all standard codes

GRP7 BII GIS DTM IMD RFF QTY GRP8C 100000

100000Conditional This segment group can be used to record two types of information: Firstly, information about all kinds of lists (like naming conventions, libraries used etc.) with their object descriptions and other details relevant to the exchanged engineering/CAD files. Secondly, detailed descriptions about the structure of the engineering/CAD files. In both cases, the information is organised hierarchically in several levels. The level will be identified first and will contain its own specific set of information, like technical data, references, etc. This segment group therefore varies depending on the type of information, the application of the segments and whether they will be used or not.

BIISTRUCTURE IDENTIFICATIONM 1

1Mandatory This segment will, through a structured index code, uniquely identify the set of information following this segment.
7429
INDEXING STRUCTURE QUALIFIER
Mandatoryan0..3
To qualify the indexing structure established for a project.
Show all standard codes
C045
BILL LEVEL IDENTIFICATION
Mandatory
A sequenced collection of facetted codes used for multiple indexing purposes.
7436
Level one id.
Conditionalan0..17
The first facet of a sequencing mechanism used to position an item within an indexing structure.
7438
Level two id.
Conditionalan0..17
The second facet of a sequencing mechanism used to position an item within an indexing structure.
7440
Level three id.
Conditionalan0..17
The third facet of a sequencing mechanism used to position an item within an indexing structure.
7442
Level four id.
Conditionalan0..17
The fourth facet of a sequencing mechanism used to position an item within an indexing structure.
7444
Level five id.
Conditionalan0..17
The fifth facet of a sequencing mechanism used to position an item within an indexing structure.
7446
Level six id.
Conditionalan0..17
The sixth facet of a sequencing mechanism used to position an item within an indexing structure.
7140
ITEM NUMBER
Conditionalan0..35
A number allocated to a group or item.

GISGENERAL INDICATORC 1

1Conditional This segment is used to define the type of information (lists or engineering/CAD file structure) appearing in this segment group identified by the previous BII segment.
C529
PROCESSING INDICATOR
Mandatory
Type of process indication.
7365
Processing indicator, coded
Mandatoryan0..3
Identifies the value to be attributed to indicators required by the processing system.
Show all standard codes
1131
Code list qualifier
Conditionalan0..3
Identification of a code list.
Show all standard codes
3055
Code list responsible agency, coded
Conditionalan0..3
Code identifying the agency responsible for a code list.
Show all standard codes
7187
Process type identification
Conditionalan0..17
Specification of a process or subprocess.
Show all standard codes

DTMDATE/TIME/PERIODC 1

1Conditional Date and time details relevant to the set of information identified in the previous BII segment (e.g. list version date).
C507
DATE/TIME/PERIOD
Mandatory
Date and/or time, or period relevant to the specified date/time/period type.
2005
Date/time/period qualifier
Mandatoryan0..3
Code giving specific meaning to a date, time or period.
Show all standard codes
2380
Date/time/period
Conditionalan0..35
The value of a date, a date and time, a time or of a period in a specified representation.
2379
Date/time/period format qualifier
Conditionalan0..3
Specification of the representation of a date, a date and time or of a period.
Show all standard codes

IMDITEM DESCRIPTIONC 1

1Conditional This segment records the details of the set of information identified in the previous BII segment (e.g. descriptions of the hierarchical levels or objects, part of the lists).
7077
ITEM DESCRIPTION TYPE, CODED
Conditionalan0..3
Code indicating the format of a description.
Show all standard codes
7081
ITEM CHARACTERISTIC, CODED
Conditionalan0..3
Code specifying the item characteristic being described.
Show all standard codes
C273
ITEM DESCRIPTION
Conditional
Description of an item.
7009
Item description identification
Conditionalan0..17
Code from an industry code list which provides specific data about a product characteristic.
1131
Code list qualifier
Conditionalan0..3
Identification of a code list.
Show all standard codes
3055
Code list responsible agency, coded
Conditionalan0..3
Code identifying the agency responsible for a code list.
Show all standard codes
7008
Item description
Conditionalan0..35
Plain language description of articles or products.
7008
Item description
Conditionalan0..35
Plain language description of articles or products.
3453
Language, coded
Conditionalan0..3
Code of language (ISO 639-1988).
7383
SURFACE/LAYER INDICATOR, CODED
Conditionalan0..3
Code indicating the surface or layer of a product that is being described.
Show all standard codes

RFFREFERENCEC 5

5Conditional This segment will give a reference to another set of information (e.g. engineering/CAD file structure referring to naming conventions given in a previously-supplied list).
C506
REFERENCE
Mandatory
Identification of a reference.
1153
Reference qualifier
Mandatoryan0..3
Code giving specific meaning to a reference segment or a reference number.
Show all standard codes
1154
Reference number
Conditionalan0..35
Identification number the nature and function of which can be qualified by an entry in data element 1153 Reference qualifier.
1156
Line number
Conditionalan0..6
Number of the line in the document/message referenced in 1154 Reference number.
4000
Reference version number
Conditionalan0..35
To uniquely identify a reference by its version number.

QTYQUANTITYC 1

1Conditional This segment conveys the number of objects within the next higher level of a list.
C186
QUANTITY DETAILS
Mandatory
Quantity information in a transaction, qualified when relevant.
6063
Quantity qualifier
Mandatoryan0..3
Code giving specific meaning to a quantity.
Show all standard codes
6060
Quantity
Mandatoryn0..15
Numeric value of a quantity.
6411
Measure unit qualifier
Conditionalan0..3
Indication of the unit of measurement in which weight (mass), capacity, length, area, volume or other quantity is expressed.

GRP8 LOC DIM QTY MEAC 1

1Conditional A group of segments to record the technical data of the set of information identified in the previous BII segment.

LOCPLACE/LOCATION IDENTIFICATIONM 1

1Mandatory This segment will give detailed information of the position in a co-ordinate system in case the structure of an engineering/CAD file is described (e.g. the co-ordinate details of a layer group or a layer in a CAD file).
3227
PLACE/LOCATION QUALIFIER
Mandatoryan0..3
Code identifying the function of a location.
Show all standard codes
C517
LOCATION IDENTIFICATION
Conditional
Identification of a location by code or name.
3225
Place/location identification
Conditionalan0..25
Identification of the name of place/location, other than 3164 City name.
1131
Code list qualifier
Conditionalan0..3
Identification of a code list.
Show all standard codes
3055
Code list responsible agency, coded
Conditionalan0..3
Code identifying the agency responsible for a code list.
Show all standard codes
3224
Place/location
Conditionalan0..70
Name of place/location, other than 3164 City name.
C519
RELATED LOCATION ONE IDENTIFICATION
Conditional
Identification the first related location by code or name.
3223
Related place/location one identification
Conditionalan0..25
Specification of the first related place/location by code.
1131
Code list qualifier
Conditionalan0..3
Identification of a code list.
Show all standard codes
3055
Code list responsible agency, coded
Conditionalan0..3
Code identifying the agency responsible for a code list.
Show all standard codes
3222
Related place/location one
Conditionalan0..70
Specification of the first related place/location by name.
C553
RELATED LOCATION TWO IDENTIFICATION
Conditional
Identification of second related location by code or name.
3233
Related place/location two identification
Conditionalan0..25
Specification of a second related place/location by code.
1131
Code list qualifier
Conditionalan0..3
Identification of a code list.
Show all standard codes
3055
Code list responsible agency, coded
Conditionalan0..3
Code identifying the agency responsible for a code list.
Show all standard codes
3232
Related place/location two
Conditionalan0..70
Specification of a second related place/location by name.
5479
RELATION, CODED
Conditionalan0..3
To specify the relationship between two or more items.

DIMDIMENSIONSC 5

5Conditional Dimensions (like unit of measurements) relevant to an engineering/CAD file can be quoted in this segment.
6145
DIMENSION QUALIFIER
Mandatoryan0..3
To specify the dimensions applicable to each of the transportable units.
Show all standard codes
C211
DIMENSIONS
Mandatory
Specification of the dimensions of a transportable unit.
6411
Measure unit qualifier
Mandatoryan0..3
Indication of the unit of measurement in which weight (mass), capacity, length, area, volume or other quantity is expressed.
6168
Length dimension
Conditionaln0..15
Length of pieces or packages stated for transport purposes.
6140
Width dimension
Conditionaln0..15
Width of pieces or packages stated for transport purposes.
6008
Height dimension
Conditionaln0..15
Height of pieces or packages stated for transport purposes.

QTYQUANTITYC 5

5Conditional A segment identifying the quantities of objects in lists or engineering/CAD files.
C186
QUANTITY DETAILS
Mandatory
Quantity information in a transaction, qualified when relevant.
6063
Quantity qualifier
Mandatoryan0..3
Code giving specific meaning to a quantity.
Show all standard codes
6060
Quantity
Mandatoryn0..15
Numeric value of a quantity.
6411
Measure unit qualifier
Conditionalan0..3
Indication of the unit of measurement in which weight (mass), capacity, length, area, volume or other quantity is expressed.

MEAMEASUREMENTSC 1

1Conditional For an engineering/CAD file, the scale used can be quoted in this segment.
6311
MEASUREMENT PURPOSE QUALIFIER
Mandatoryan0..3
Specification of the purpose of the measurement.
Show all standard codes
C502
MEASUREMENT DETAILS
Conditional
Identification of measurement type.
6313
Property measured, coded
Conditionalan0..3
Specification of the property measured.
Show all standard codes
6321
Measurement significance, coded
Conditionalan0..3
Code specifying the significance of a measurement value.
Show all standard codes
6155
Measurement attribute identification
Conditionalan0..17
Code used to specify non-discrete measurement values.
Show all standard codes
6154
Measurement attribute
Conditionalan0..70
To specify non-discrete measurement values.
C174
VALUE/RANGE
Conditional
Measurement value and relevant minimum and maximum values of the measurement range.
6411
Measure unit qualifier
Mandatoryan0..3
Indication of the unit of measurement in which weight (mass), capacity, length, area, volume or other quantity is expressed.
6314
Measurement value
Conditionalan0..18
Value of the measured unit.
6162
Range minimum
Conditionaln0..18
Minimum of a range.
6152
Range maximum
Conditionaln0..18
Maximum of a range.
6432
Significant digits
Conditionaln0..2
To specify the number of significant digits.
7383
SURFACE/LAYER INDICATOR, CODED
Conditionalan0..3
Code indicating the surface or layer of a product that is being described.
Show all standard codes

UNTMESSAGE TRAILERM 1

1Mandatory A service segment ending a message, giving the total number of segments in the message and the control reference number of the message.
0074
NUMBER OF SEGMENTS IN A MESSAGE
Mandatoryn0..6
Control count of number of segments in a message.
0062
MESSAGE REFERENCE NUMBER
Mandatoryan0..14
Unique message reference assigned by the sender.